Carpenter & joiners near Camden Town from £26 per hour

Build cupboards with shelves along one whole wall of the living room, 5 sections. Total area 237cm height, 340cm wide, 45cm deep approx. Section 1: 90cm wide cupboard with 4 internal drawers and shelves above. Section 2: 44cm wide with shelves. Section 3: 77cm wide shelves. Section 4: 44cm wide 4 internal drawers and shelves above. Section 5: 95cm wide desk top with shelves above. The walls are...

Replacing floorboards in a small area.Leveling the floor.

Need shelves with a cabinet door at the bottom.need clothes rail installed. Need shelves built in wall corners and under stairs storage.

I have an HMO flat for rental and it is situated in EC1. I am in need of 3 internal doors for the bedrooms as follows: 1. 3 fire resistance Doors -are the (FD30) type suitable? 2. Intermittent Smoke Seals for the above 3 doors and for another 3 -main entrance and door to the sitting room and door to the bathroom 3. Self-Closing Devices - for the above 3 doors and for another 3 - as stated...

Fix wardrobe shelf and drawers

Smoke seal installation - Need to add smoke seals on fire doors for HMO

Need to replace a staircase banister

I have 6 draws that need repairing just need to be glued and maybe Beeding around the bottom to keep more supported

We have 7/8 doors some not closing and some not opening

Hello it’s to cut a desk piece of wooden to make it smaller

Built a brealkast table 1.40cm long 40 cm with legs 70 cm length 40 cm with

I’m looking to build two wardrobes in my bedroom. I have attached a mark up floor plan, my design for both wardrobes as well as screenshots of what I am looking for. I am hoping to utilise the curve at the door as shoe storage on the right hand side wardrobe. I’m also considering using those larder pocket doors on the left hand side wardrobe given it opens onto the bed. I want the look of the...

Sliding door does not run smoothly on its guide after slamming

2 kitchen worktops cut to size and a hole for sink and hole for hob and put on

I need a trustworthy carpenter who works per hour rate and that is flexible